CONVENTIONAL LATHES
CONVENTIONAL LATHES
TK540
- Optimal design for excellent turning performance.
- High rigidity one piece cast iron base.
MENU
| Capacity | |
|---|---|
| Swing over Bed | 540mm (21”) |
| Swing over cross slide | 360mm (14”) |
| Swing over gap | 720mm (28.3”), Opt. |
| Between centers | 1000mm/1500mm/2000mm/3000mm(40”, 60”, 80”, 120”) |
| Tailstock | |
| Quill dia. / Center taper, mm | 75mm (2.95”) / MT5 |
| Travel | 170mm (6.69”) |
| Headstock | |
| Spindle bore | 85mm (3.3”),105mm (4”), Opt. |
| Spindle nose | D1-8, A2-11, Opt |
| Spindle speeds (steps) | 25-1545 rpm (18) |
| Spindle motor | 10 / 15 HP, Opt |
| Threads | |
| Lead screw | 4 TPI or 6 mm / pitch |
| Metric / pitch, range | 0.5 - 7 mm / pitch (24 kinds) |
| Inch, range | 4 - 56 TPI (36 kinds) |
| Module / pitch, range | 0.25 - 3.5 M (16 kinds) |
| DP, range | 8 - 112 P (36 kinds) |
| Feeding Range | |
| Longitudinal feeds | 0.06-0.88 mm/rev |
| Cross feeds | 0.03-0.44 mm/rev |
| Miscellaneous | |
| Bed width | 350mm (13.78”) |
| Cross slide travel | 305mm (12”) |
| Compound rest travel | 150mm (5.9”) |
| Coolant pump motor | 1/8 HP |
※ The specifications are subject to change without prior notice.
This site uses cookies to improve your browsing experience. we'll assume you're OK to continue. If you want to read more about this, please chick PRIVACY thank you.
Confirm