重切削普通车床
重切削普通车床
TK450
- Optimal design for excellent turning performance.
- High rigidity one piece cast iron base.
MENU
| Capacity | |
|---|---|
| Swing over Bed | 460mm (18.1＂) |
| Swing over cross slide | 290mm (11.4＂) |
| Swing over gap | 640mm (25＂), Opt. |
| Between centers | 1000mm/1500mm/2000mm(40＂, 60＂, 80＂) |
| Tailstock | |
| Quill dia. / Center taper, mm | 75mm (2.95＂) / MT5 |
| Travel | 170mm (6.69＂) |
| Headstock | |
| Spindle bore | 56mm (2.2＂) |
| Spindle nose | D1-6 |
| Spindle speeds (steps) | 39-2800 rpm (18) |
| Spindle motor | 7.5 / 10 HP, Opt |
| Threads | |
| Lead screw | 4 TPI or 6 mm / pitch |
| Metric / pitch, range | 0.5 - 7 mm / pitch (24 kinds) |
| Inch, range | 4 - 56 TPI (36 kinds) |
| Module / pitch, range | 0.25 - 3.5 M (16 kinds) |
| DP, range | 8 - 112 P (36 kinds) |
| Feeding Range | |
| Longitudinal feeds | 0.06-0.88 mm/rev |
| Cross feeds | 0.03-0.44 mm/rev |
| Miscellaneous | |
| Bed width | 350mm (13.78＂) |
| Cross slide travel | 280mm (11＂) |
| Compound rest travel | 120mm (4.7＂) |
| Coolant pump motor | 1/8 HP |
※ 规格如有变更，恕不另行通知。
本网站使用 cookie 来改善您的浏览体验。 如果继续使用本站表示您同意。 如果您想了解更多相关信息，请查看 隐私权政策，谢谢。
Confirm