重切削普通车床
MENU
| Capacity | |
|---|---|
| Swing over Bed | 600 mm (23.6＂) |
| Swing over cross slide | 390 mm (15.3＂) |
| Center height | 300 mm (11.8＂) |
| Swing over gap | 820 mm (32.2＂) |
| Between centers - 400 mm bed | 1500 mm (59”), 2000 mm (78＂), 3000 mm (118＂), 4000 mm (157＂) |
| Between centers - 460 mm bed | 2000 mm (78＂), 3000 mm (118＂), 4000 mm (157＂), 5000 mm (196＂) |
| Gap width from spindle nose | 450 mm (17.7＂) |
| Tailstock | |
| Quill Diameter - 400 mm bed | 80 mm (3.1＂) |
| Quill Diameter - 460 mm bed | 95 mm (3.7＂) |
| Center taper | MT5 |
| Quill travel | 230 mm (9＂) |
| Headstock | |
| Spindle bore, Dia. - 400 mm bed | 104 mm (4＂) |
| Spindle bore, Dia. - 460 mm bed | - |
| Spindle nose | D1-11 or A-11 |
| Spindle speed (rpm) | 15-1000,12 steps |
| Hydraulic chuck | 15HP |
| Feed and Threads | |
| Cross slide travel - 400 mm bed | 300 mm |
| Cross slide travel - 460 mm bed | - |
| Cross feeds | 0.025-0.35 mm / rev (36 kinds) |
| Longitudinal feeds | 0.05-0.7 mm / rev (36 kinds) |
| Lead screw diameter | Dia. 45 mm |
| Lead screw pitch | 2TPI (inch) or 12 mm(metric) |
| Threading range, inch | 2-28 TPI (36 kinds) |
| Threading range, metric | 0.8-14 mm (65 kinds) |
| Module pitch threads | 0.5-7M (22 kinds) |
| DP. pitch threads | 4-56P (36 kinds) |
| Compound rest travel | 230 mm (9＂) |
| Tool size | 25 x 25 mm |
| Taper attachment stock (Opt.) | 400 mm (15.7＂) |
※ 规格如有变更，恕不另行通知。
本网站使用 cookie 来改善您的浏览体验。 如果继续使用本站表示您同意。 如果您想了解更多相关信息，请查看 隐私权政策，谢谢。
Confirm