龙门铣床

DCM-4852

加入询价车

Table
T-Slot (W x D x M)	28 mm x 200 mm x 17 (1.1＂ x 7.8 ＂ x 17)
Length	5000 mm (196.8＂)
Width	3000 mm (118.1＂)
Maximum load	24000 kgs
Travel
Longitudinal travel(X axis)	5200 mm (204.7＂)
Cross travel (Y axis)	4800 mm (189＂)
Vertical travel (Z axis)	1100mm (43.3”) / 1400 mm (55.1”) (OPT.) / 1500 mm (59”) (opt)
Distance from spindle end to table	260 ~ 1360 mm / 250 ~ 1750 mm (opt)10.2＂ ~ 53.5＂ / 9.84＂ ~ 68.9＂ (opt)
Distance from spindle center to column	470 mm (18.5＂)
Distance between columns	4850 mm (190.9＂)
Spindle
Spindle taper	BT50
Spindle drive motor(Con./ 30min)	22 kw / 26 kw (opt 30 kw / 37 kw)
Spindle speeds	6000 rpm
ATC
Tool size	Dia. 125 mm (4.9＂)
Max. tool size	Dia. 220 mm (8.6＂)
Tool storage capacity	32 tools
Max. tool length	400 mm (15.7＂)
Max. tool weight	20 kgs
Tool shank & pull stud	BT 50 45˚
Feed
Cutting federate	10000 mm/min
Rapid traverse (X/Y/Z)	10 / 12 / 15
Miscellaneous
Power requirement	50 ~ 60 KVA
Pneumatic requirement	6.5 kgs/cm130
Machine size length	13400 mm(528”)
Machine size width	8000 mm (315”)
Machine size height	5500 mm (216.5”) / 6450 mm 253.9”)
Machine weight	75 ton

※ 规格如有变更，恕不另行通知。

特性

能够进行重切削和高速加工
适合超重型零件的精密加工
铸件采用优质米汉纳铸造技术和球墨铸铁制成
X、Y、Z轴滚柱式线性导轨
直驱式高速主轴结合高/低两段式齿轮箱
主轴头配置蓄能器式自动补偿平衡系统