龙门铣床

DCMS-28

加入询价车

Table
T-Slot (W x D x M)	28 mm x 500 mm
Length	From 6000 mm to 36000 mm, in step of 1000 mm(From 236＂ to 1417＂, in step of 39.4＂)
Width	2000 mm(78.7＂)
Maximum load	3000 kg/m2
Travel
Longitudinal travel(X axis)	From 6000 mm to 36000 mm, in step of 1000 mm(From 236＂ to 1417＂, in step of 39.4＂)
Cross travel (Y axis)	2800 mm(110.2＂)
Vertical travel (Z axis)	1100 mm / 1400 mm (opt)
Distance from spindle end to table	1080-2180 mm / 1020-2420 mm (opt)
Distance from spindle center to column	427 mm (16.8”)
Distance between columns	2850 mm(112.2＂)
Spindle
Spindle taper	BT50
Spindle drive motor(Con./ 30min)	22 / 26 kw (opt 30 / 37 kw)
Spindle speeds	6000 rpm
ATC
Tool size	Dia. 125 mm (4.9＂)
Max. tool size	Dia. 220 mm (8.6＂)
Tool storage capacity	32 tools
Max. tool length	400 mm
Max. tool weight	20 kgs
Tool shank & pull stud	BT 50 45˚
Feed
Cutting federate	6000 mm/min
Rapid traverse (X/Y/Z)	12 / 12 / 10
Miscellaneous
Power requirement	70 KVA / 80 KVA (with 30 kw / 37 kw spindle motor) (opt.)
Pneumatic requirement	6.5 kgs / cm²
Machine size length	From 13500 mm to 43500 mm, in step of 1000 mm
Machine size width	6900 mm(271.7”)
Machine size height	6500 mm
Machine weight	53 up ton

※ 规格如有变更，恕不另行通知。

特性

能够进行重切削和高速加工
适合超重型零件的精密加工
铸件采用优质米汉纳铸造技术和球墨铸铁制成
X、Y、Z轴滚柱式线性导轨
直驱式高速主轴结合高/低两段式齿轮箱
主轴头配置蓄能器式自动补偿平衡系统