重切削普通车床
MENU
| Capacity | |
|---|---|
| Swing over Bed | 1270 mm (50”) |
| Swing over cross slide | 944 mm (37”) |
| Swing over gap | 1720 mm (68”) |
| Between centers | 1700 mm / 2200 mm / 3200 mm / 4200 mm / 5200 mm / 6200 mm / 7200 mm / 8200 mm(70” / 87” / 126” / 165” / 205” / 244” / 283” / 323”) |
| Tailstock | |
| Quill dia. / Center taper, mm | 165 (6.5”) / MT6 |
| Travel | 300 mm (12”) |
| Headstock | |
| Spindle bore | 155 mm (6”) 230 mm (9”) Opt. / 255 mm (10”) Opt. / 305 mm (12”) Opt. |
| Spindle nose | A2-11 / A2-15 Opt. / A2-20 Opt. |
| Spindle speed (rpm), steps | 5 ~ 615 / 4 ~ 430 (A2-15 Opt.) / 2 ~ 390 (A2-20 Opt.) (18) |
| Spindle motor | 20 HP, 25 HP (30 Opt.) |
| Threads | |
| Lead screw | 12 mm / pitch (2 TPI) |
| Metric / pitch, range | 1 - 30 mm |
| Inch, range | 1 ~ 30 TPI |
| Module / pitch, range | 0.5 - 15 M |
| DP, range | 2 ~ 60 TPI |
| Feeding Range | |
| Longitudinal feeds | 0.07 - 2.03 mm / rev |
| Cross feeds | 0.028 - 0.81 mm / rev |
| Miscellaneous | |
| Bed width | 625 mm (25”) |
| Cross slide travel | 700 mm (28”) |
| Compound rest travel | 380 mm (15”) |
| Coolant pump motor | 1/6 HP |
| Gross weight, kgs | 6900 / 7300 / 8100 / 8900 / 9700 / 10500 / 11300 / 12100 |
※ 规格如有变更，恕不另行通知。
本网站使用 cookie 来改善您的浏览体验。 如果继续使用本站表示您同意。 如果您想了解更多相关信息，请查看 隐私权政策，谢谢。
Confirm