CONVENTIONAL LATHES
CONVENTIONAL LATHES
TK1270
- Cross & Iongitudinal rapid travel
- Magnetic brake for main spindle
MENU
| Capacity | |
|---|---|
| Swing over Bed | 1270 mm (50”) |
| Swing over cross slide | 944 mm (37”) |
| Swing over gap | 1720 mm (68”) |
| Between centers | 1700 mm / 2200 mm / 3200 mm / 4200 mm / 5200 mm / 6200 mm / 7200 mm / 8200 mm(70” / 87” / 126” / 165” / 205” / 244” / 283” / 323”) |
| Tailstock | |
| Quill dia. / Center taper, mm | 165 (6.5”) / MT6 |
| Travel | 300 mm (12”) |
| Headstock | |
| Spindle bore | 155 mm (6”) 230 mm (9”) Opt. / 255 mm (10”) Opt. / 305 mm (12”) Opt. |
| Spindle nose | A2-11 / A2-15 Opt. / A2-20 Opt. |
| Spindle speed (rpm), steps | 5 ~ 615 / 4 ~ 430 (A2-15 Opt.) / 2 ~ 390 (A2-20 Opt.) (18) |
| Spindle motor | 20 HP, 25 HP (30 Opt.) |
| Threads | |
| Lead screw | 12 mm / pitch (2 TPI) |
| Metric / pitch, range | 1 - 30 mm |
| Inch, range | 1 ~ 30 TPI |
| Module / pitch, range | 0.5 - 15 M |
| DP, range | 2 ~ 60 TPI |
| Feeding Range | |
| Longitudinal feeds | 0.07 - 2.03 mm / rev |
| Cross feeds | 0.028 - 0.81 mm / rev |
| Miscellaneous | |
| Bed width | 625 mm (25”) |
| Cross slide travel | 700 mm (28”) |
| Compound rest travel | 380 mm (15”) |
| Coolant pump motor | 1/6 HP |
| Gross weight, kgs | 6900 / 7300 / 8100 / 8900 / 9700 / 10500 / 11300 / 12100 |
※ The specifications are subject to change without prior notice.
This site uses cookies to improve your browsing experience. we'll assume you're OK to continue. If you want to read more about this, please chick PRIVACY thank you.
Confirm