重切削傳統車床
MENU
| Capacity | |
|---|---|
| Swing over Bed | 1975 mm (77.75＂) |
| Swing over cross slide(Half length) | 1720 mm (67.71＂) |
| Swing over cross slide(Full length) | 1550 mm (61.02＂) |
| Center height | 1000 mm (39.37＂) |
| Bed width / Auxiliary guide | 1345 mm (52.95”) / 1550 mm (61.02”) |
| Between centers | 3000 – 12000 mm (120 – 480“) |
| Between width / Auxiliary guide | 1345 mm (52.95”) / 1550 mm (61.02”) |
| Tailstock | |
| Center taper | MT7 |
| Quill diameter | Dia. 290 mm (11.4”) Heavy duty rotating qui |
| Quill travel | 300 mm (11.81”) |
| Headstock | |
| Spindle bore, Dia. | Dia. 203 mm (8”) |
| Spindle nose | A2-15 |
| Spindle speed (rpm), steps | 6 – 400 rpm |
| Spindle motor | 75 HP |
| Miscellaneous | |
| Coolant pump | 1 HP |
| Rapid motor | 2 HP |
| Lubricatio pump | 12 W |
| Machine weight (3 meter B.C.) | 29000 kgs |
| Each extra 1000 mm weight | 3500 kgs |
| Feed and Threads | |
| Cross feeds | 0.056 – 0.96 mm / rev (45 kinds |
| Cross slide travel | 1250 mm (full length) / 510 mm (half length) |
| Longitudinal feeds | 0.13 – 1.92 mm / rev (48 kinds) |
| Lead screw | Dia. 60 mm x 2 TPI (inch) or Dia. 60 mm x 12 mm (metric) |
| Threading range, inch | 1 – 15 TPI (48 kinds) |
| Threading range, metric | 2 – 30 mm / pitch (48 kinds) |
| Module pitch threads | 1 – 15 M (32 kinds) |
| DP. pitch threads | 2 – 30 HP (45 kinds) |
| Compound rest travel | X1: 250 mm manual feeding / Z1: 350 mm auto feeding |
| Tool size | 50 x 50 mm (2 x 2”) |
※ 規格如有變更，恕不另行通知。
本網站使用 cookie 來改善您的瀏覽體驗。 如果繼續使用本站表示您同意。 如果您想了解更多相關信息，請查看 隱私權政策，謝謝。
Confirm