CONVENTIONAL LATHES
MENU
| Capacity | |
|---|---|
| Swing over Bed | 1975 mm (77.75”) |
| Swing over cross slide(Half length) | 1720 mm (67.71”) |
| Swing over cross slide(Full length) | 1550 mm (61.02”) |
| Center height | 1000 mm (39.37”) |
| Bed width / Auxiliary guide | 1345 mm (52.95”) / 1550 mm (61.02”) |
| Between centers | 3000 – 12000 mm (120 – 480“) |
| Between width / Auxiliary guide | 1345 mm (52.95”) / 1550 mm (61.02”) |
| Tailstock | |
| Center taper | MT7 |
| Quill diameter | Dia. 290 mm (11.4”) Heavy duty rotating qui |
| Quill travel | 300 mm (11.81”) |
| Headstock | |
| Spindle bore, Dia. | Dia. 203 mm (8”) |
| Spindle nose | A2-15 |
| Spindle speed (rpm), steps | 6 – 400 rpm |
| Spindle motor | 75 HP |
| Miscellaneous | |
| Coolant pump | 1 HP |
| Rapid motor | 2 HP |
| Lubricatio pump | 12 W |
| Machine weight (3 meter B.C.) | 29000 kgs |
| Each extra 1000 mm weight | 3500 kgs |
| Feed and Threads | |
| Cross feeds | 0.056 – 0.96 mm / rev (45 kinds |
| Cross slide travel | 1250 mm (full length) / 510 mm (half length) |
| Longitudinal feeds | 0.13 – 1.92 mm / rev (48 kinds) |
| Lead screw | Dia. 60 mm x 2 TPI (inch) or Dia. 60 mm x 12 mm (metric) |
| Threading range, inch | 1 – 15 TPI (48 kinds) |
| Threading range, metric | 2 – 30 mm / pitch (48 kinds) |
| Module pitch threads | 1 – 15 M (32 kinds) |
| DP. pitch threads | 2 – 30 HP (45 kinds) |
| Compound rest travel | X1: 250 mm manual feeding / Z1: 350 mm auto feeding |
| Tool size | 50 x 50 mm (2 x 2”) |
※ The specifications are subject to change without prior notice.
This site uses cookies to improve your browsing experience. we'll assume you're OK to continue. If you want to read more about this, please chick PRIVACY thank you.
Confirm