FLAT BED CNC LATHE
MENU
| Capacity | |
|---|---|
| Swing over Bed | 1170 mm (46”) |
| Swing over cross slide(Half length) | 845 mm (33.2”) |
| Swing over cross slide(Full length) | 720 mm (28.3”) |
| Center height | 585 mm (23”) |
| Distance between centers | 2150 - 14150 mm (84”) - (557”) |
| Bed width / Auxiliary guide | 1020 mm (40”) / 1170 mm (46”) |
| Width of cross slide | 420 mm (16.5”) |
| Width of carriage | 950 mm (37.4”) |
| Spindle | |
| Spindle speeds / A2-11(6") | 9~600 rpm ( Opt. 12~800 rpm) |
| Spindle speeds / A2-15(9") | 9~450 rpm ( Opt. 12~600 rpm) |
| Spindle speeds / A2-20(12") | 9~400 rpm (12”), 9~300 rpm (14.5”) |
| Spindle speeds / A2-20(14") | 9~400 rpm (12”), 9~300 rpm (14.5”) |
| Spindle speeds / A2-28 (16") | 6~250 rpm |
| Spindle speeds / A2-28 (21") | 6~220 rpm |
| Spindle center | MT6 |
| Carriage | |
| Turret | H4-450 Servo or V8 Hydraulic |
| Tool size | 32 x 32 mm (1.25”) |
| X axis travel(Half length cross slide) | 600 mm (23.6”) |
| X axis travel(Full length cross slide) | 900 mm (35.4”) |
| Z axis Travel | 2150 mm (45.3”) – 14150 mm (557”) |
| X axis rapid travel, Ball screw dia. | 6M / min, dia. 40 mm x P5 |
| Z axis rapid travel, Ball screw dia. | 6M / min,1-5M (dia. 63 mm x P10); 5M / min, 6-7M (dia. 80 mm x P10)5M / min, 8-14M (Rack and Pinion Driver) |
| Tailstock | |
| Quill diameter | Dia. 250 mm (9.84”) Opt. dia. 350 mm (13.7”) |
| Quill travel | 250 mm (9.84”) / Opt. 300 mm (11.8”) |
| Quill taper | MT6 |
| Motor | |
| X axis servo motor | FANUC αiF22 4kw |
| Z axis servo motor | 2-3M FANUC αiF22 4 kw, 4-7M FANUC αiF22 4 kw (Gear Box)8-14M FANUC αiF40 6 kw (Rack and Pinion Driver) |
| Spindle motor | FANUC αiI 30 30 / 37 kw (40 / 50 HP) |
| Lubricant pump motor | 25 W |
| Coolant pump | 1.2 kw |
| Hydraulic pump | 2.25 kw |
| Machine weight | |
| 2000 mm center distance | 17500 kgs |
| Each extra 1000 mm weight | 1500 kgs |
※ The specifications are subject to change without prior notice.
Features
Solid box construction casting headstock
Spindle speed ranges are auto changed by M code
Infinitely variable speeds are commanded by S code
4 bed ways for better rigidity
Full power output at low spindle speed
High torque (166 times of spindle motor torque)
Spindle speed ranges are auto changed by M code
Infinitely variable speeds are commanded by S code
4 bed ways for better rigidity
Full power output at low spindle speed
High torque (166 times of spindle motor torque)
This site uses cookies to improve your browsing experience. we'll assume you're OK to continue. If you want to read more about this, please chick PRIVACY thank you.
Confirm