SWISS TURN CNC LATHE
MENU
| Machining capacity | |
|---|---|
| Bar stock diameter at main spindle | 3-20 |
| Max. bar diameter at back spindle | 20 |
| Max. machining length | 210 mm (Direct motor-driven guide bushing) 80 mm (Mechanical-driven guide bushing) 250 mm (Fixed guide bushing) 46 mm (Guide bushing-less) |
| Max. drilling / tapping diameter of main spindle | Dia. 10 mm / M8 |
| Deep hole drilling | Dia. 8 mm |
| Max. drilling / tapping diameter of sub spindle | Dia. 8 mm / M6 |
| Max. drilling / tapping diameter of cross tool | L side: Dia. 6 mm / M5 ; R side: Dia. 8 mm / M6 |
| Max. drilling / tapping diameter of back tool | Dia. 6 mm / M5 |
| Max. mountable slitting saw | Dia. 30 mm |
| Speed | |
| Main spindle | 200-12000 min-1 |
| Back spindle | 200-12000 min-1 |
| Rotary guide bushing | 200-12000 min-1 (Motor direct-drive) 200-8000 min-1 (Mechanical-drive) |
| Cross / Back tool | 200-8000 min-1 |
| Tool | |
| Mountable tool number | 28 (Std) / 39 (Max.) |
| OD tool shank | 12 x 12 x 100 mm |
| ID tool shank | Dia. 22 mm |
| Chuck of cross live tool | L side: ER11 x 2, ER16 x 1 R side: ER16 x 2 (Opt.) |
| Chuck of back live tool | ER16 x 4 (Opt.) |
| Chuck of back fixed tool | ER 16 |
| Chuck of deep hole drill | ER 16 |
| OD tool number | 5 |
| Face fixed ID tool | 5 |
| Back fixed ID tool | 5 |
| Cross live tool | 4 |
| Back live tool | 4 (Fix) + 4 (Live) |
| Face deep drill tool | 2 |
| Rapid feed rate | 30 M / min (X: 24 M / min) |
| Motor | |
| Coolant pump | 0.75 Kw |
| Lubrication pump | 0.011Kw |
| Hydraulic pump | - |
| Spindle cooling oil pump | 0.19 Kw |
| Main spindle motor | 2.2 / 3.7 Kw (Con. / 15 min) |
| Back spindle motor | 1.5 / 2.2 Kw (Con. / 15 min) |
| Cross tool motor | L side: 0.75 Kw ; R side: 1 Kw |
| Back tool motor | 1 Kw |
| Direct drive rotary guide bushing | 0.75 / 1.1 Kw (Con. / 10 min) |
| Axes motor | X1, Y2, Z1, X2, Z2 - 0.5 Kw ; Y1 - 0.75 Kw |
| Axes travel | |
| X1 | 124 mm |
| Y1 | 280 mm |
| Z1 | 290 mm |
| X2 | 340 mm |
| Y2 | 60 mm |
| Z2 | 300 mm |
| Miscellaneous | |
| Machine weight | 3700 Kgs |
| Power source requirement | 14.3 KVA |
| Compressed air requirement | ≧ 4 kg / cm2 |
| Air consumption | ≧ 30 NL / min |
| Coolant tank capacity | 180 L |
| Machine size | 2300 x 1400 x 2000 mm |
※ The specifications are subject to change without prior notice.
This site uses cookies to improve your browsing experience. we'll assume you're OK to continue. If you want to read more about this, please chick PRIVACY thank you.
Confirm