SWISS TURN CNC LATHE
MENU
| Machining capacity | |
|---|---|
| Bar stock diameter at main spindle | 8-26 |
| Max. bar diameter at back spindle | 26 |
| Max. machining length | 320 mm (Direct motor-driven guide bushing) 50 mm (Guide bushing-less) |
| Max. drilling / tapping diameter of main spindle | Dia. 12 mm / M10 |
| Deep hole drilling | Dia. 10 mm |
| Max. drilling / tapping diameter of sub spindle | Dia. 10 mm / M8 |
| Max. drilling / tapping diameter of cross tool | L side: Dia. 8 mm / M6 ; R side: Dia. 8 mm / M6 |
| Max. drilling / tapping diameter of back tool | Dia. 8 mm / M6 |
| Max. mountable slitting saw | Dia. 45 mm |
| Speed | |
| Main spindle | 200-10000 min-1 |
| Back spindle | 200-10000 min-1 |
| Rotary guide bushing | 200-10000 min-1 (Motor direct-drive) |
| Cross / Back tool | 200-6000 min-1 (Standard: 4800 min-1) |
| Tool | |
| Mountable tool number | 27 (Std) / 39 (Max.) |
| OD tool shank | 16 x 16 x 100 mm |
| ID tool shank | Dia. 25 mm |
| Chuck of cross live tool | L side: ER16 x 3, ER20 x 1 R side: ER16 |
| Chuck of back live tool | ER16 |
| Chuck of back fixed tool | ER16 (Opt. ER20) |
| Chuck of deep hole drill | ER 16 |
| OD tool number | L: 5 ; R: 7 |
| Face fixed ID tool | 5 |
| Back fixed ID tool | 5 |
| Cross live tool | L side cross live tool : 4 ; R side cross live tool : 3 |
| Back live tool | 4 |
| Face deep drill tool | 2 |
| Rapid feed rate | 30 M / min (X: 24 M / min) |
| Motor | |
| Coolant pump | 0.75 Kw |
| Lubrication pump | 0.011Kw |
| Hydraulic pump | - |
| Spindle cooling oil pump | 0.19 Kw |
| Main spindle motor | 3.7 / 7.5 Kw (Con. / 10 min) |
| Back spindle motor | 2.2 / 3.7 Kw (Con. / 10 min) |
| Cross tool motor | 1 Kw |
| Back tool motor | 1 Kw |
| Direct drive rotary guide bushing | 2.2 / 3.7 Kw (Con. / 10 min) |
| Axes motor | X1, Y1, Z1, X2, Z2 - 0.75 Kw |
| Axes travel | |
| X1 | 142 mm |
| Y1 | 348mm |
| Z1 | 320 mm |
| X2 | 370 mm |
| Y2 | - |
| Z2 | 335 mm |
| Miscellaneous | |
| Machine weight | 3500 Kgs |
| Power source requirement | 21.4 KVA |
| Compressed air requirement | ≧ 4 kg / cm2 |
| Air consumption | ≧ 100 NL / min |
| Coolant tank capacity | 180 L |
| Machine size | 2150 x 1280 x 1930 mm |
※ The specifications are subject to change without prior notice.
This site uses cookies to improve your browsing experience. we'll assume you're OK to continue. If you want to read more about this, please chick PRIVACY thank you.
Confirm